hydraulic breaker, hydraulic breaker Manufacturer, hydraulic breaker Supplier
keywords:
Tel:

+86 17616253000

E-mail:bryant@hydraulicbreakers.net
Address:Korea Industrial Park, Fushan District, Yantai City, Shandong Province, China.

News

Correct Operation Method of Crushing Hammer

Source: Time:2020-09-07 10:14:50 浏览次数:

1.The crushing hammer should be lubricated before operation and within 2-3 hours of continuous operation. When butter is beaten, the hammer should be placed vertically. The fibre rod should be compacted and not suspended, so that butter can not enter the hydraulic system. It should be noted that butter should not be injected too much. Too much butter will stick to the piston. Butter will easily enter the hydraulic system when it is re-operated.



The following is the correct operation method of the crushing hammer.

1.The crushing hammer should be lubricated before operation and within 2-3 hours of continuous operation. When butter is beaten, the hammer should be placed vertically. The fibre rod should be compacted and not suspended, so that butter can not enter the hydraulic system. It should be noted that butter should not be injected too much. Too much butter will stick to the piston. Butter will easily enter the hydraulic system when it is re-operated.

2. In crushing operation, the crushing hammer should be kept perpendicular to the material and the drill rod  should be pressed tightly against the crushed object. If the direction of hammering is inclined, the steel brazing is easy to slip off during hammering operation, which may cause the fracture or jamming of the steel brazing  and piston. Therefore, when crushing operation, breakdown point should be selected to ensure that the crushing  hammer and material keep 90 degrees angle.

3. When crushing hammer, do not use crushing hammer to move/pry stones, which can easily lead to breakage of steel brazing of crushing hammer and damage of bracket. When the steel braze is inserted in the stone, the excavator should not walk or swing its arms and arms!

4. In the daily work of crushing hammer, do not hoist it with crushing hammer.  This kind of operation will cause damage to drill rod and bracket of crushing hammer.



Production Model of Crushing Hammer


Above is about the operation method of crushing hammer. Our company is a manufacturer of crushing hammer with production and sales as a whole. Our crushing hammer models are complete, including SB10.SB20.SB30.SB40 and other products. We have a complete range of products and after-sales service in place. For more detailed information about SB30 crushing hammer, please click.Detailed information on crushing hammer



Previous:How to Guarantee the Safe Use of Crushing Hammer

next:Already the last article

Return