in mines, railways, highways, municipal and other work occasions. In the face of harsh construction sites, not only to ensure the efficiency of construction, but also to ensure the safety of construction.
The following is to introduce the correct use of crushing hammer:
1.In order to ensure the use and installation of crushing hammer, it is the first step. The installation of
crushing hammer is the condition of construction. As long as the quality of engineering machinery
and equipment operation is improved, engineering accidents can be reduced as far as possible.In this regard,
the installation process and specifications of the crushing hammer should be
determined according to the relevant specifications for the installation of construction machinery
and equipment, and then the installation personnel and later operators can accurately install and
use the crushing hammer in accordance with the specifications.
2. It is necessary to test the machine. The test operation is to test the mechanical performance and the specifications of spare parts before the crushing hammer is put into operation. The proper debugging is also to further test the quality of the crushing hammer and to reduce the defects of the crushing hammer as much as possible. After the completion of the test machine, each part is reinforced again.
3. The operation of crushing hammer should be standardized. Configuration of personnel's protective equipment and selection of operation methods. For example, before the impact, select the appropriate impact point and confirm the stability of the drill rod, then start the work impact. It can't be used as a hammer. Put the drill bit on the ground before the beginning. Never attempt to use the crusher as a hammer to crush objects. The result of doing so will lead to damage to the crusher and machinery.Model of Crushing Hammer